This technique is based on Ultrahigh Bit-rate Lightweight X-band Transceiver. Combining the satelline, user’s cell phones,the transceiver mentioned, we proposed a multi-user two-way communication system with extremely high bit-rate.

The objective of this study is to develop a high energetic ignition powder which combines the features of nano-aluminum (nAl) powderNitrocellulose (NC)Ammonium perchlorate (AP). The study covers from the deployment of the igniter using above three materials, the research of the ignition mechanismthe application in engineering field.

The ion thruster uses metallic ions as the propellant. By using the concept of electron-beam physical vapor deposition processing, a zinc target is bombarded, heated, evaporated,ionized by magnetron e-beam bombardments. Zinc ions are accelerated by an electric fieldthus provides thrusts.

ModularizedThrottleable Hydrogen Peroxide Hybrid Rocket Engine with Direct-Drive Thrust Vector Control Technology

Smart evacation supporting system is based on scenarios to exercise different conditions of evcuation operation. And, the data analysis algorithm will recommend a evacution route for different users according to the conditions. Finally, the system provide real-time evacution informatton through LINE channel.

The aim of the present study is to develop an operational forecasting system for flash floods in mountainous areas in Taiwan by integrating numerical meteorological, hydrologicalhydrodynamic modelsa visualization computer program.

-

With rapid evolution of Moores lawsemiconductor technology nodes down to sub-10 nm, advanced devicematerial technologies capable of Å accuracy are highly demanded. Thus we developed atomic layer technologies including atomic layer deposition, atomic layer annealing, atomic layer epitaxy,atomic layer etching, etc. for extreme control of materialsstructures with Å precision.

High-accuracy 3D sensingAI image processing system for constructing high-quality immersion 3D image for AR/VR. Chaotic Lidar with APD arrayTOF sensors supports millimeter-accuracyinterference-avoiding capability. High-performance CNN processor supports high-performancelow DRAM bandwidth computations for various image AI applications.

The objective of this project is to develop a portablewireless urine detection systemplatform for prevention of cardiovascular disease. The main idea is to develop a system-on-chip, a microelectrodemicrochannel chip to detect biomarkers concentrations in urine. And then, it will be wirelessly transmitted to a smart application platform to evaluate user’s cardiovascular status.

Within 10 years, Taiwan will become a super senior society with the proportions in silver hairs of more than 20. Thus, a high-throughputsmart platform with bio-physiology-marker panels is developed for PD progression by combining the bio-medicalphysical sensors, SPRsmart circuit design, leading to a new UPDRS for a more accurateearly diagnosis of a physician.

This project is to implement a 37-40 GHz mmWave transceiver supporting 4096 QAM modulationis utilized for long-distance 4K/8K real-time image data transmission. The 37-40GHz band is divided into 500 channels,the AI technology is used for the TRx to carry out digital calibration. The achievement is TRx module (SoC/SiP)would be installed on the UAV for wildlife resources monitoring.

This project is used for advanced driver assistance systems (ADAS)automatic driving. At present, our project will use a more sensitive CMOS single photon detector array to reduce the number of photons required for detection to less than ten, in order to break through the cost barriers of applications of LiDARestablish low-cost, high-performance LiDAR modules.

The Broadband Ocean Bottom Seismometer(BBOBS) is a marine instrument that collects natural earthquakesartificial sound sources. BBOBS project has been leading by TORI, Academic Sinica,National Sun Yat-Sen University from designing, testing to success. BBOBS have been deployedrecovered in several research cruisesobtained the great results.

Through patented wearable sensor fusion technology, human 3D motions can be captured in real-time which allow 7-DOF robotic armdexterous robotic hand to perform anthropomorphic motiongrasping action. Integrated with eye-in-hand visual module, the adaptive gripper can intelligently decide optimal grasping strategy to ensure success grasping of arbitrary shape of objects in smart manufacturing applications.

The ULTRASONIC technologythe Non-contact power transmission technology offers high qualityefficient machining for ceramicother brittle materials. Depending on the workpiece requirements, our product allows higher feedinfeed, which increases machining efficiency for at least 30, longer tool lifesignificantly better surface finishes.

The special gear processing software was developed to calculate the cutting path. The CNC gear generator with high flexibility was utilized to process all kinds of special gear teethdress the gear precision by control feedbackcompensation. Conversational human-machine interface has contributed to simplification of modification programoperator.

For the working places where have the risk of burningexplosion, non-sparking tools are important safety tools. They are made of hardest Cu-Be alloys. However, Be is very expensivepoisonous. To overcome this, we develop Be-free copper alloys which have high hardness for tools. In Taiwan, we have steel-tools industry. To have higher profit, it is promising to produce such Be-free non-sparking tools.

Inspired by the surface of the insect skin, a special nanostructure was grown on the membrane surface that is the key for omniphobic membrane which is able to treat low surface energy wastewater. The technique of omniphobic membrane combined with membrane contactors has the opportunity to become a trend in the future for water resources, carbon capture, valuable minerals recoveryhigh-purity drug crystallization.

Biomimetic adhesive has some characteristics: no residual glue, anisotropic adhesion, easy to be peeledstuckrepeated. Its adhesion could be adjusted depend on the application. The adhesive can be applied but not limited in wafer processing, movement of optoelectronic materials, 3C product assembly, daily-used fixation,producing a protective film for attaching to an object surface.

The first waterproof fabric-based multifunctional triboelectric nanogenerator that can produce electricity from natural tiny impacts (rainswinds)body movements is presented. It can not only serve as a flexible, adaptive, wearable,universal energy collector but also act as a self-powered fabric-based interface. This multifunctional yet nimble energy device can provide new vision for decentralized, remote,wearable energy technologies.

After the publication of TEM PSHA2015. Updated version to the TEM PSHA2019, we considered updated seismogenic structure database, newly identified structure with 3D geometry, an earthquake catalog to 2016, state-of-the-art seismic models,site amplification factors. The ETAS (Epidemic-Type Aftershock Sequence) model aims to forecast the aftershocks from a large mainshock in real-timereduce its effectiveness.

Through the study of structural biological materialthe multiscale analysissimulation, we construct an initiative integrated platform, which provides user-friendly experience, automatically generates designs of lightweight structure for the demandsoffers various choices of materialssuggestions. This design platform contains great potential for engineering applications.

The core technology includes lightweight UAV, heterogeneous sensor integration, obstacle avoidance, group flight automatic flight control, RTK precision positioning systemfruit tree 3D stereo modeling technology. The UAV can be used for 3D scanningspectral information collection. The information can use for fruit tree growth monitoring, nutrient analysis,fruit quality monitoring.

The smart glove was made by soft force sensor with the multi-walled carbon nanotube cast in the mesh structurecombined with an interdigitated electrode together, then used AC/DC conversionspace calculation to establish the interactive virtual reality(VR) somatosensory system under the wireless. The recipient can achieve the same feedback as the demonstrator＇s behaviorskills in VR.

This technology develop a “Thermoelectric Ever-Charge Portable Charger” for the applications in auxiliary charging of consumer electronicsfast self-charging for outdoor sensors. Technically, a sputtering depositiona semiconductor photolithography technique are combined to fabricate p-n materialsconnection procedures. The thermoelectric performance of the device is further optimized through a low-temperature heat treatment.

The novel aM device (AC@SGO) is capable of removing extra, unwantedtoxic ions. Particularly it can replace the RO water purifier with even better performance. In addition, the aM device can also be used in industrial RO wastewater recycling with a minimum maintenance necessity. The aM device with the advantages of relatively low costmultiple functions would have a high business competitiv

This technique employs AIbig data analytics to precisely forecast cooling load demandestimate efficiency of different chiller combinations. Time-of-Use Pricingoptimal chiller load interval are also considered for practical needs. Decision supports of optimal chiller configuration are provided to enhance energy conservation.

This technology uses the low-carbon geopolymer material & high emission powder to make the passive radiative cooling inorganic coating. Besides, all raw materials are from easily-gained oreindustrial by-products,the multi-color appearance is also developed. Notably, for decreasing the heat island effect, this coating is feasible to transmit heat into radiation that can be throughout t

When the bicycle is tilted, the anti-dumping support rod moves to the outside of the frame due to gravitycentrifugal force to form a large bottom area,the stability is high. The warning lighthorn of the support rod can prevent the rear vehicle from chasinghave high safety. With the use of the clamping fixture, it can be installed on various types of bicycles to have high market