This successful technology is the digital interventions on depression patients based on (1) heart rate variability bio-feedbacks (HRVBs) measured by a novel flexible sensor patch attached on patient’s wrist(2) an APP. An innovative flexible low-power PPG patch has been designed which is capable of providing weeks of high-quality PPG signals which are essential towards accurate estimation of HRV for favorable efficacy of designed digital interventions. Also, An AI model correlating the HRVsand PHQ-9/HDRS scores of depression patients will be built based on collected data.

Solar-driven triple-electrode PFC is a new clean energy process. It can simultaneously accomplish the photogeneration of electricityphotodegradation of organic pollutants by unlimited solar energy. H2O2 can be generated from water splitting in a green processobtain the high energy density similar to H2. The PFCs that comprise triple-electrode were designedconstructed for H2O2 productionfuel cell, respectively with treatment of organic wastewater. Proceeding in the way, a portable triple-photoelectrode PFC device was assembled to generation electricity with additional functions of providing safer drinking water. The novel fuel cell can also be engineering scaled up to provide electricity for a familycommunity.

In NSRRC, we set up a superradiant free electron laser in terahertz frequency range by employing an in-house developed laser-driven photocathode radio frequency electron gun system and a technology called radio frequency electron bunch compression. It is currently the terahertz radiation source with the highest peak power in Taiwan. In addition, we also designed an extreme ultraviolet free electron laser test facility that is based on similar technology. These light sources can be applied significantly to research fields such as semiconductors, quantum materials, and biomedicine.

These stimuli-switchable nanoparticles coated with the cleavable outer polymer coatingmultifunctional peptides may afford a new platform for anticancer drugmiR. These nanoparticles possess characteristics of environmental response, active targeting,gene/chemo combinatorial therapeutics, thus providing spatiotemporal control of posttranｓｃｒｉｐｔional gene regulation, smart nuclear/mitochondrial localization,simultaneous inhibition of multiple progression pathways of tumor cells for enhancing antitumor efficacysafety of cancer therapy.

In this work, we demonstrate a dual multiplication layers In0.52Al0.48As based avalanche photodiode, which is desired for ToF lidarFMCW lidar application due to its high performances in both Geiger modelinear mode operations. By combining the specially designed mesa shape with dual M-layer structure, we can achieve high single photon detection efficiencyneat temporal characteristic of 65ps . On the other hand, we can also achieve high gain-bandwidth product ,high saturation currenthigh photo-generated RF power under 0.9 Vbr at the same time.

Within 10 years, Taiwan will become a super senior society with the proportions in silver hairs of more than 20. Thus, a high-throughputsmart platform with bio-physiology-marker panels is developed for PD progression by combining the bio-medicalphysical sensors, SPRsmart circuit design, leading to a new UPDRS for a more accurateearly diagnosis of a physician.

"Visible Light Communication (VLC)" is the best candidate for the next generation of network communication owing to its wide bandwidthscompatibility with solid-state lighting devices. Our proposed technology features a novel multilevel photosensing memory which can integrate the photosensing, memorycomputation components for VLC into one device. This device is based on a thin film transistor, where the oxide semiconductor is added with gold nanoparticles to form a "co-active layer" in order to expand the visible light sensing spectrumefficiently convert the light signal into a current signal. It not only simplifies the production processreduces the cost, but also accelerates the signal transmission speed, which further advances the future mobile comm

ULF Raman spectroscopy utilizes novel VHG filters to spectrally clean up the laser line before ULF Raman spectroscopy is measured with a single grating spectrometer in conjunction with CCD camera. The availabilityaccessibility of UFL Raman spectroscopy opens new opportunity to reveal key information such as intermolecular structure characterization, pharmaceutical polymorph identification,material phaseinterfacial structure determination.

Quantum key distribution exploits the transmissiondetection of single photons’ quantum states to generatedistribute secure keys, allowing absolutely secure communication. We use a self-developed miniature single-photon source, together with the single-photon wavepacket engineering, to implement a highly efficient protocol of differential-phase-shift quantum key distribution. Using the Ca

“Aerogel Cold Chain Storage Box with High-efficiency Thermal Insulation Performance” insulation layer includes phase change materials aerogel phenolic foamed insulation materials,aerogel insulation coatings. The carbon fibre used composite materials as the box shell. It is an innovative vaccine mobile refrigerator that does not require a power supply. It can keep cold for a long timehas good low-temperature stability. Our thermal materials have better cold retentionfire resistance than the insulation material used in the international COVID-19 vaccine storage.

This project with aim of promoting digital optics education is funded by Ministry of Education. In the entry-level class, students are guided in the hand-on experiments to bring up the ability to set up optical pathsto learn the basic optics principles. In the advance-level class, students are encouraged to work on a 3D holographic project using the fast-response LCOS-SLM developed in Digital Optics Teaching Laboratory of NYCU. Students are able to apply different computer-generated holography (CGH) algorithmsdesign optical path accordingly to obtain desired holographic images.

"Introduce dielectric-fuse breakdown OTP (dFuse-OTP) technology: a.) dFuse is a newly discovered OTP mechanism which is totally different from the conventional mechanisms of anti-fuse, eFuse,charge-storage b.) IPs of dFuse OTPs have been protected globally c.) dFuse OTPs are totally integratedcompatible in the standard CMOS technologies without any additional masks d.) small layout celllow cost e.) dFuse OTPs have been at the phase of trial production in the first two big Taiwanese foundries."

The technology aims to develop an AI-based integrated system for emotional detections (anger, sadness, happiness,neutral)multimodal physiological signals (ECG, EEG,PPG),apply to patients with cardiovascular disease. Patients monitor their emotionalphysical statusadminister bio-neuro-feedback to improve their well-being, track disease progression,prevent adverse prognosis.

Under the support of the MOSTHigher Education SPROUT projects, we have successfully developed a new model of the FOG aiming for the sensing vibrational environment. Our miniaturized integrated optical gyroscope vibration sensors (CIGS), only 250 grams in weighthalf of a business card in footprint, feature high performance (bias stability 1o/hr)cost effectiveness. The sensor is the key to many applications such as the seismic front wave detectionthe vibration monitoring of volcanos, wind turbines, wafer isolation platform, high tension towers, buildings,vehicle bodies.

We developed a Multiview 3D capturing system based on camera array for generating stereoscopic 3D printing. Based on the framework, we are capable to create well aligned 3D contentcalibrated color images. The depth perception of content can be manually adjusted for preview,for generating quality 3D stereoscopic printing.

A transfer learning-assisted glaucoma detection system was build first with training images from the fundus images database of Taipei Veterans General Hospital,then fine-tuned to improve its applicability on fundus images from different datasets. This system aims to assist clinic-based glaucoma screening to increase the diagnostic rate of glaucoma by using existing healthcare facility.

首創(a)超薄型毫米波雙極化寬頻天線，較過去成果具厚度優勢(b)3D雙曲面空腔結構增加垂直貼片天線頻寬，較過去具頻寬優勢(c)毫米波多功能RFIC整合技術，大幅降低封測廠毫米波RFIC自動測試方案成本及(d)低變異量頻率可重置之寬頻切換式相移器，大幅切換頻帶時仍維持低振幅與相位變異量。

Fumigation is the most reliable method for pest control in a confined space. However, all current fumigants available are either highly toxic to mammalsharmful to the atmosphere. We provide a new technology, including novel fumigantsa rapid evaporating device. With its wide effectiveness to various insects, low toxicity to mammals, friendly to the environment, etc., our technology may attract users in custom quarantine, warehousing, home pest control, etc. We provide a novel fumigation technology that potentially satisfies the global demand of new fumigants.

We first reported that Bidens pilosa (BP), an ediblemedicinal plant, suppress coccidiosisgut bacterial infection as evidenced by increased survival rate, better performance, gut pathologymicrobiota in chickens. In addition, combining with probiotics with anti-pathogenic bacteria activityorganic acids synthesis are used as novel natural growth promoters to replace antibiotic growth promoters.

A composite multi-cation high-entropy catalyst, which integrates the concept of high-entropy compounds into traditional metal oxide catalysts, such as spinel, perovskite, and fluorite structure. By the combination of photoelectric, piezoelectric, and ferroelectric materials with the characteristic high-entropy oxides. The high-entropy composite piezoelectric catalysts could become a promising technology for clean energy applications, such as organic dye degradation and hydrogen generation.

This multi-sensing system has pH range in 3 – 13temperature resistance of 2 Ω/°C. The conductivity part can clearly distinguish the conductivity of different liquids. This multi-sensor has good stabilitycan be applied to different water bodies in the future,combined with the cloud system, provides a intelligent detection methods.

This project integrates clinical physicalmental medical practice, medical engineering, information engineeringsocial welfare units, adopts cross-fieldsuses AI technology,builds an innovative artificial intelligence auxiliary evaluationtreatment system for dementia care based on cultural context. Establish an early intervention mechanism for early detection of dementia,establish measures to improve cognitive function, emotional state, socialdaily behavioral functions.

Provided are a series of novel organometallic iridium complexes, a synthetic method thereof,an organic light emitting device using the same.

With the development of photonics, there has been a push towards optoelectronic devices that are flexible, rollable, wearable, user-friendly, and robust to improve human-machine interfaces. To be integrated onto human body, these devices must be biocompatible and be able to withstand mechanical deformation and different bending curvatures. Figure 1 shows the rollable and soft photonic meta-device.

Rapid fabrication of network-structured amphiphilic block copolymer photonic crystal films could be accomplished by the facile spin-casting process. By immersing into alcohols, the swollen network could give rise to the visible structural coloration. Unlike the disappearance of the visible reflection in the lamellar film, the network structure could trap the visible structural coloration by vitrification of the network after drying, namely, trapping of structural coloration (TOSC). With further control of diffusive distance and diffusivity, full-visible-wavelength structural colorations are obtained. This TOSC is reversible and responsive with heat. By TOSC, we firstly fabricate the flexible copolymer photonic crystal featuring tunable and reversible structural colorations in solid state.

We developed a unique integrated quantum polarization entangled light source, in addition to generating a quantum polarization entangled photon pair, the integrated quantum chip also utilizes a special adiabatic optical light transfer array to integrate the on-chip polarization-dependent spectral splitting via the quantum tunneling effect. The integrated quantum light source provides a stable polarization entangled source for the more quantum applications.

In Taiwan, there are almost 96 million people look for medical treatment due to diabetes. The project successfully used the infrared light measurement system to observe the differences between the bilateral feet,collocating with the Chaos Synchronization to measure the differences between different signals, to decrease the probability of the attendance as the ultimate objective .

1. Infrared wax physisorption kinetics (iR-WPK) provides a glyco-histopathological imaging analysis for examining tissue sections, which utilizes n-alkanes with carbon number (CN) from 20 to 34 and beeswax as glycan adsorbents for targeting similar longitudinal length of glycans of glycoconjugates anchoring in the cell surface. 2. It is an in-situ non-destructive method of examining tissue sections for cancer screening and prognosis prediction for chronic kidney disease by profiling aberrant glycans covalently-attached to both glycoconjugates anchored in tissue sections. 3. It can screen ten cancers including colon cancer, breast cancer, ovary cancer, cervical cancer, oral cavity cancer, gastric cancer, skin cancer, prostate cancer, intestinal neuroendocrine tumor and brain cancer.

This technology uses in-situ optical photointerrupt sensorin-situ acoustic ultrasonic transducer to measure the growth of fouling layer thickness during membrane water treatment. Being the world’s first to combine real-time filter speed attenuation dataphysical mode of clogging, the clogging of film can be instantly analyzed in a smart way which in turn effectively extends its lifetime. T

We originally design a highly efficient NdYVO4/KGW Raman laser at 579.5 nm. The KGW crystal is specially coated to prevent the Stokes wave from propagating through the gain medium so as to minimize the cavity losses. Moreover, we explore a new output coupler with double-sided dichroic coating to exterminate the leakage power of the Stokes wave to lead to a remarkable improvement for the output efficiency. The maximum output power can be up to 10.5W at a pump power of 40W. The conversion efficiency of the diode pump light to yellow laser output can be increased to 26.3.