進階篩選

Technical category
    • Vacuum Functional Coating Technology

      Electronic & Optoelectronics FutureTech Vacuum Functional Coating Technology

      Here we prepare a non-evaporative getter (NEG) film using magnetron sputtering. A vacuum chamber with a sputtered NEG film can maintain ultra-high vacuum (-10 Torr level) without any pump after activation. The activation temperature can be controlled below 200 °C according to different process conditions. The activated NEG film adsorbs residual gases in the vacuum system to achieve the UHV.
    • 微流道繞射晶片搭配雷射系統高速準確計數全血中循環腫瘤細胞/細菌

      FutureTech 微流道繞射晶片搭配雷射系統高速準確計數全血中循環腫瘤細胞/細菌

      A microfluidic diffraction device is developed for determination of CTC/bacteria from human whole blood with a home-constructed laser beam system. We design the optical structuretransfer the structure to transparent plastic substrate. The plastic diffraction die is modified with antibodies of the target to combine a fluidic system as a microfluidic diffraction chip. When human whole blood with CTCs/bacteria flows through the chip, the number of cells/bacteria can be obtained directly with label-free. The devices has been applied in clinical diagnosis of oesophagealendometrial cancer.
    • Low-temperature magnesium hydrogen storage materials and energy storage applications

      Smart machinerynovel materials FutureTech Low-temperature magnesium hydrogen storage materials and energy storage applications

      The goal of this project is to study "low-temperature magnesium hydrogen storage materials and energy storage applications". Mg hydrogen storage materials with a hydrogen storage capacity of 5.0 wt% is developed,and their dehydrogenation rate at 250℃ will be significantly enhanced using a forcible pump. The Mg hydrogen storage powders are inserted into a tank for cyclic hydrogenation-dehydrogenation tests. The H2 gas desorbed from the tank is supplied to a high-temperature proton exchange membrane fuel cell (HT-PEMFC,160℃) for power generation.
  • 1