This technology contains two important sub-technologies. The first is the development of ultra-high performance concrete composite materials, mastering the 3D printing related properties,developing printable concrete that can actually be used for printing. The second is the simulation, analysisoptimization technology of the concrete 3D printing process. The infinite element method developed by ourselves is used to simulateanalyze the concrete 3D printing process,the geometric of the object is considered to optimize the printing pathparameters.

Inorganic porous nanofibers with surfaceinterface defects are prepared through humidity-controlled electrospinninghigh-temperature annealing technology. Under the irradiation of light sources of different wavelengths (380~780 nm), the bound electrons stored in the valence band can be excited to the conduction band to form free electrons on the surface of the material, generating different intensities of microcurrents, light sensitivitymicrocurrent changes. Because the "inorganic nanofiber" technology has high uniquenesshigh product compatibility, it can be applied to a wide range of markets.

Inorganic porous nanofibers with surfaceinterface defects are prepared through humidity-controlled electrospinninghigh-temperature annealing technology. Under the irradiation of light sources of different wavelengths (380~780 nm), the bound electrons stored in the valence band can be excited to the conduction band to form free electrons on the surface of the material, generating different intensities of microcurrents, light sensitivitymicrocurrent changes. Because the "inorganic nanofiber" technology has high uniquenesshigh product compatibility, it can be applied to a wide range of markets.

This invention targets at value-added increase for fish bone/scale by-products through a series of manufacturing units of steaming, pressure/ temperature,drying. The core design of pressure/temperature in terms of powdered machining equipment consists of a high pressure chamber, heating components, superheated steam,operations experiments as well.

Technology localization of design verification for substructure of OWT by introducing the international OC4 project outcomes has been established, considering geological conditions of domestic wind farms, especially for typhoonearthquake. The proposed load calculation procedure can be useful for design, O&M of future domestic offshore wind farms.

A catalytic thin film was deposited on a porous substrate by a liquid phase method for the synthesis of CNTs as a superhydrophobicsuperoleophilic membrane which is non-toxicenvironmental friendly. The filter membrane was installed on the oil-water separation device for operation without power it’s an important technology for recycling economyenvironmental protection.

The smoke removal device with smart detection has the capability of gas detectionindoor air circulation. The system is internally equipped with a sensing device. If an abnormal PM2.5 valuea high concentration of dangerous gas is detected, the fan can be automatically activated immediately to quickly filter the air,both preventivemonitoring functions can be achieved.

"1. Innovative globally active balance circuit 2. Charging mode: evenly charges each cell to full state without overcharging any cell via two staged charging logics 3. Discharging mode: injecting balance current to the weakest cell via external power source 4. Extending range 10~15increasing lifespan 5~10."

The anhydrous calcium chloride absorbs the water contents in the airturns them into liquid water. The liquid water then becomes the electrolyte to initiate the electrochemical reaction of the metal-air fuel cell. The electricity generated from the fuel cell is used to power the ventilation fan inside a wardrobe cabinetcreates its circulation with outside atmosphere.

An integrated solar photovoltaic-driven electrochemical water treatment technology have been developed with many advantages such as high energy independence, versatilityportability. The technology consists of photovoltaic systemelectrocatalytic/electrosorption processes, regarded as an innovative, energy-efficient water treatment system to remove organic pollutantscharged ions.

The water two-phase change is used for energy conversion,the average air flow rate of the invention can be completely isolated as long as 0.2 m/sec, which can save 6RT freezing capacity equivalent to 6KW energy consumption compared with the conventional smoke exhausting cabinet body, effectively interacting with the outside world. Space isolation to avoid leakage of high pollution toxic gases

This technology uses the low-carbon geopolymer material & high emission powder to make the passive radiative cooling inorganic coating. Besides, all raw materials are from easily-gained oreindustrial by-products,the multi-color appearance is also developed. Notably, for decreasing the heat island effect, this coating is feasible to transmit heat into radiation that can be throughout t

This product-oriented technology is to utilize water chestnut husk as a starting precursor in the production of activated carbon using physical activation process.The resulting activated carbon is characteristic of its high microporosity, high BET surface areatotal pore volume, which is superior to commercial activated carbon products.

This technique employs AIbig data analytics to precisely forecast cooling load demandestimate efficiency of different chiller combinations. Time-of-Use Pricingoptimal chiller load interval are also considered for practical needs. Decision supports of optimal chiller configuration are provided to enhance energy conservation.

The novel aM device (AC@SGO) is capable of removing extra, unwantedtoxic ions. Particularly it can replace the RO water purifier with even better performance. In addition, the aM device can also be used in industrial RO wastewater recycling with a minimum maintenance necessity. The aM device with the advantages of relatively low costmultiple functions would have a high business competitiv

The proposed technology erects the solar panel in installation. The reflector can be adjusted to modulate the percentage of sunlight for photovoltaic generationillumination in corresponding to the change of weatherseason.

This technology develop a “Thermoelectric Ever-Charge Portable Charger” for the applications in auxiliary charging of consumer electronicsfast self-charging for outdoor sensors. Technically, a sputtering depositiona semiconductor photolithography technique are combined to fabricate p-n materialsconnection procedures. The thermoelectric performance of the device is further optimized through a low-temperature heat treatment.

The smart glove was made by soft force sensor with the multi-walled carbon nanotube cast in the mesh structurecombined with an interdigitated electrode together, then used AC/DC conversionspace calculation to establish the interactive virtual reality(VR) somatosensory system under the wireless. The recipient can achieve the same feedback as the demonstrator＇s behaviorskills in VR.

The core technology includes lightweight UAV, heterogeneous sensor integration, obstacle avoidance, group flight automatic flight control, RTK precision positioning systemfruit tree 3D stereo modeling technology. The UAV can be used for 3D scanningspectral information collection. The information can use for fruit tree growth monitoring, nutrient analysis,fruit quality monitoring.

Through the study of structural biological materialthe multiscale analysissimulation, we construct an initiative integrated platform, which provides user-friendly experience, automatically generates designs of lightweight structure for the demandsoffers various choices of materialssuggestions. This design platform contains great potential for engineering applications.

After the publication of TEM PSHA2015. Updated version to the TEM PSHA2019, we considered updated seismogenic structure database, newly identified structure with 3D geometry, an earthquake catalog to 2016, state-of-the-art seismic models,site amplification factors. The ETAS (Epidemic-Type Aftershock Sequence) model aims to forecast the aftershocks from a large mainshock in real-timereduce its effectiveness.

The first waterproof fabric-based multifunctional triboelectric nanogenerator that can produce electricity from natural tiny impacts (rainswinds)body movements is presented. It can not only serve as a flexible, adaptive, wearable,universal energy collector but also act as a self-powered fabric-based interface. This multifunctional yet nimble energy device can provide new vision for decentralized, remote,wearable energy technologies.

Biomimetic adhesive has some characteristics: no residual glue, anisotropic adhesion, easy to be peeledstuckrepeated. Its adhesion could be adjusted depend on the application. The adhesive can be applied but not limited in wafer processing, movement of optoelectronic materials, 3C product assembly, daily-used fixation,producing a protective film for attaching to an object surface.

Inspired by the surface of the insect skin, a special nanostructure was grown on the membrane surface that is the key for omniphobic membrane which is able to treat low surface energy wastewater. The technique of omniphobic membrane combined with membrane contactors has the opportunity to become a trend in the future for water resources, carbon capture, valuable minerals recoveryhigh-purity drug crystallization.

For the working places where have the risk of burningexplosion, non-sparking tools are important safety tools. They are made of hardest Cu-Be alloys. However, Be is very expensivepoisonous. To overcome this, we develop Be-free copper alloys which have high hardness for tools. In Taiwan, we have steel-tools industry. To have higher profit, it is promising to produce such Be-free non-sparking tools.

The special gear processing software was developed to calculate the cutting path. The CNC gear generator with high flexibility was utilized to process all kinds of special gear teethdress the gear precision by control feedbackcompensation. Conversational human-machine interface has contributed to simplification of modification programoperator.

The ULTRASONIC technologythe Non-contact power transmission technology offers high qualityefficient machining for ceramicother brittle materials. Depending on the workpiece requirements, our product allows higher feedinfeed, which increases machining efficiency for at least 30, longer tool lifesignificantly better surface finishes.

Through patented wearable sensor fusion technology, human 3D motions can be captured in real-time which allow 7-DOF robotic armdexterous robotic hand to perform anthropomorphic motiongrasping action. Integrated with eye-in-hand visual module, the adaptive gripper can intelligently decide optimal grasping strategy to ensure success grasping of arbitrary shape of objects in smart manufacturing applications.

The Broadband Ocean Bottom Seismometer(BBOBS) is a marine instrument that collects natural earthquakesartificial sound sources. BBOBS project has been leading by TORI, Academic Sinica,National Sun Yat-Sen University from designing, testing to success. BBOBS have been deployedrecovered in several research cruisesobtained the great results.

High-accuracy 3D sensingAI image processing system for constructing high-quality immersion 3D image for AR/VR. Chaotic Lidar with APD arrayTOF sensors supports millimeter-accuracyinterference-avoiding capability. High-performance CNN processor supports high-performancelow DRAM bandwidth computations for various image AI applications.