The present invention aims to develop of novel wavelength converting films with the composited perovskite quantum dots,facilitating the application of this technology for LED backlight module.We applying PQD on chip to the components of LED backlight modules. The PQD-LEDs that are used for the backlight transmitted through a color filter exhibit the ITU-R Recommendation BT.2020 approximately 90

The technology realizes a perovskite nanocrystal-polymer composite material, which has extremely high stability at room temperaturehigh temperature. It can be used for 3D printing, shaped into fluorescent microfilaments,can also be used for white light-emitting diodes. The application of this air-stabile perovskite nanocrystal-polymer composite material in the 3D printing industry, texti

In this work, we demonstrate a dual multiplication layers In0.52Al0.48As based avalanche photodiode, which is desired for ToF lidarFMCW lidar application due to its high performances in both Geiger modelinear mode operations. By combining the specially designed mesa shape with dual M-layer structure, we can achieve high single photon detection efficiencyneat temporal characteristic of 65ps . On the other hand, we can also achieve high gain-bandwidth product ,high saturation currenthigh photo-generated RF power under 0.9 Vbr at the same time.

This technology is a new microarray chip sensing technology that integrates "organic light-emitting diodes", "liquid crystal chemical sensors" and "mobile communication system" into "multifunctional liquid crystal smart cloud sensors". The obtained signals are uploaded to the cloud for multi-dimensional analysis to achieve multiplex detection in one single sample. This sensor device is lightweight, low-cost, simple to operate, and the target-of-interest can be custom-made according to user needs.

This project is used for advanced driver assistance systems (ADAS)automatic driving. At present, our project will use a more sensitive CMOS single photon detector array to reduce the number of photons required for detection to less than ten, in order to break through the cost barriers of applications of LiDARestablish low-cost, high-performance LiDAR modules.

We originally design a highly efficient NdYVO4/KGW Raman laser at 579.5 nm. The KGW crystal is specially coated to prevent the Stokes wave from propagating through the gain medium so as to minimize the cavity losses. Moreover, we explore a new output coupler with double-sided dichroic coating to exterminate the leakage power of the Stokes wave to lead to a remarkable improvement for the output efficiency. The maximum output power can be up to 10.5W at a pump power of 40W. The conversion efficiency of the diode pump light to yellow laser output can be increased to 26.3.

A high power converter application built with GaN HEMT was presented. The technical aspects are developed from 6-inch wafers to converter applications, covering the optimization of 6-inch GaN epitaxial layers. The processdevice model of the 6-inch GaN E/D-mode component was established. Low-side GaN HEMT logic gates ( 2MHz) for integrated circuit were designed. Finally, The high-frequency LLC resonant converter is completed.

We proposedshowed the ferroelectric materials served as a prospective substrate to support TMD to achieve a pn homojunction, as the accumulationdepletion of an inevitably charged mobile carrier occurs in the TMD to screen the polarization field of the FE substrate. This work provides a non-volatile control of TMD dopinga promising way to produce a pn homojunction as a future building block of 2D device applications.

A new emission model of organic light-emitting diode (OLED) based on triplet-triplet annihilation upconversion (TTAUC) with a high intrinsic upconversion efficiency (86.1) by using tris-(8-hydroxyquinoline)aluminum (Alq3)9,10-Bis(2-naphthyl)anthracene (ADN) as green sensitizerblue emitter, respectively. This structure improved the device efficiencyoperation lifetime compared to the conventional TTA-OLEDs. A record-high efficiency of 15.4EQEa 1.5x lifetime performance comparing to the commercial blue OLED are obtained by utilizing the TTAUC mechanism.