The present invention relates to a solid sodium carbon dioxide battery, which can utilize carbon dioxide gascan chargedischarge at room temperature. This solid carbon dioxide battery is composed of a positive electrode, a negative electrode,an inorganic solid electrolyte sheet. In order to improve the contact between the electrodethe inorganic solid electrolyte sheet, a positive/negative interface layer can also be introduced.

"1. Innovative globally active balance circuit 2. Charging mode: evenly charges each cell to full state without overcharging any cell via two staged charging logics 3. Discharging mode: injecting balance current to the weakest cell via external power source 4. Extending range 10~15increasing lifespan 5~10."

The aim of this study was to develop of high safety, high performance sulfide-based all-solid-state Li-ion battery (ASSLIB). The ASSLIB composes of a flexible, high ionic conductive,moisture insensitive sulfide-based solid-state electrolyte (SSE) film, Si/C composite anode material with self-healing polymer binder, high capacity LiNi0.8Co0.1Mn0.1O2 (NMC811) composite cathode,garnet-in-polymer solid composite interlayer to prevent decomposition of sulfide-based SSE with electrode materials.

Metal-organic framework is a kind of regular porous material which is self-assembled by metal ion centerorganic ligand framework. I used the metal-organic framework as a templateprecursor to successfully develop a low-cost bimetallic phosphide, which exhibits excellent water splitting hydrogen production performance. The on-site real-time change experiment technology provided by Taiwan Photon Source is a great weapon for real-time detection of active sitesreaction centers during the development of key catalyst materials.

"This technology uses mechanism design so that it can be easily installed on the motorcycle suitcase,uses solar panels for energy harvesting. The harvesting energy from harvesting IC is stored in the 18650 lithium battery for reuse. The patented LED drive circuit drives a 1W LED lamp with current limiting circuit for internal lighting,provides a 5 V 3 A USB charging system using a boost current limit circuit for the lithium battery voltage,has an under voltage lockout function to prevent battery over-discharge."

The invention belongs to the field of low-temperature electrochemical graphitizationis improved by the FFC-Cambridge Process. In comparison to the traditional process, the invention can be at a low temperature of 850oCshorter process time. This strategy can convert carbon blacks into high-value graphite (graphene). The method is simple, low temperature, without adding catalyzer,low-cost. The products have a wide range of applications such as energy storage, catalysis, absorption, separation, processing metal cutter, precision die, aeronautics,astronautics.

We developed our very own battery management system as well as improved the battery infrastructure, ensuring higher voltage as well as better safety we completely redesigned the suspension system, monitoring different dynamic performances via individual shock absorbers we also used the lighterstronger carbon fiber as the material for our wishbones.

In the prior art of high-efficiency anode materials for lithium-ion batteries, we designed a high-entropy compositionmanufactured it through a simplemass production method. This technology inherits the cocktail effect of high-entropy alloys by combining highly active elementsmetal elements. This material can be manufactured by a simple mass production method. It shows high energy density, high Coulomb efficiencyhigh cycle stability,becomes a promising anode material for lithium-ion batteries.

Using PVDF-HFP, lithium salt, LLZOplasticizer to prepare HSE membrane (ơi=4.6×10-4 S/cm, 25oC). The Free-standingcathode-supported membranes in the pouch-type NCM811HSELi ASSLBs were designed to enhance the mechanical strength (Li-Nafion-coated cellulose support, the total membrane thickness is 40-60 µm), improve Li-ion conductivity (Doped LLZO/Li salt), reduce interfacial impedance (PVDF-HFP/Li salt/plasticizer),inhibit Li dendritic deposition. The energy density of the ASSLBs has reached 300 Wh/kg, which exceeds the current best LIBs by 50.

Electroplated nanotwinned Cu possesses excellent electrical & mechanical properties. It can be applied in three major joints: 1. Low thermal budget/ low resistance Cu bonding for high performance computing chip. We are able to achieve low temperature bondinginstant bonding. Low temperature bonding is performed at 150°C for 1 h to achieve low contact resistance copper bonding. Instant bonding is performed at 300°C for 5 seconds under a pressure of 90MPa achieve low contact resistance. 2. High strength/ High ductility copper lines in 3D-IC packaging We are able to fabricate high strength foils with tensile strength of 800MPa. After annealing at 150°C for 3 hours, the foil retains a tensile strength of 750MPa. 3. Cu foils for lithium ion battery

"1.Background: The deterioration of lithium batteries leads to safetycost issues. Ultrasonic detection has the advantages of cost, size,immediacy. 2.Detection: Under the control environment, the ultrasonic signal is actuated on each part of the battery,the reflectedtransmitted wave is collected. 3.Analysis: It has methods such as spectrum, image,DL to evaluate the SoH, the distribution of degradation types,the location of faulty cells in the battery module. 4.Theory: Use the acoustic properties of the battery with software simulation to verify the measured data."